You are here:Home > Aircraft > Sailplanes
Choose a sub category:
F3J/TD DLG/ F3K RES
SLOPE and DS F3B & F3F CROSS COUNTRY
2 Meter ARF and PNP
Sort By:
Page of 1
EGIDA ELDORADO F3B/F3F
EGIDA
Price: $2,295.00
SALE Price: $1,950.00
ELDORADO F3B/F3F
Price: $2,295.00
SALE Price: $1,950.00
Salto T
List Price: $495.00
Price: $449.00

Jaro Muller's new F3B/F3F model, the Eldorado!
More Information coming soon.

Vulture New Vulture V3 X-tail Electric
New Vulture V3
Price: $1,199.00
ROYALE 4m
Price: $2,795.00
The wait is finally over! The Vulture is Skip Miller Models new competition F3J model that is fully competitive at nearly half the price of the competition.




The NEW Vulture V3 X-tail Electric. The Vulture now comes in as a X-tail and an electric version. It flies great, and performs even better.


Span - 4 meters; 158"
Wing area - 1400 sq. in.
Aspect ratio - 17.83
Weight - 56-72 ounces
Wing loading - 5.9 to 7.4 oz/sq. ft.
Planform and airfoils - Mark Drela
Construction - High modulus and ultra high modulus carbon. Molded wing spar.
ARGEMA Satori Satori
Argema
Price: $1,395.00
Satori
Price: $1,950.00
Satori F5J
Price: $1,950.00
The Satori is Stefan Eders new F3J model. The model has amazing performance; launches fast and high, has an amazing L/D, and great dead air times. The model has one of the best fit and finished that we have seen.




The Satori F5J is Stefan Eders new F5J model. The model has amazing performance and is awesome as an electric. The model has one of the best fit and finished that we have seen.




Poky 40 Sunbird
Poky 40
Price: $345.00
SALTO
Price: $449.00
Sunbird
Price: $395.00
New flying wing for slope and DS



James designed it to be very transportable – basically, disassembled it can fit on a car parcel shelf, so it is very convenient to carry around, but at the same time he wanted to make an airframe that in expert hands could really perform. The aerofoil section is probably quite advanced for this kind of plane and gives a very wide speed range and possibility of operation in a wide range of wind conditions.


MACH II MINI MACH Viper 3X
MACH II
Price: $695.00
MINI MACH
Price: $395.00
Viper 3X
Price: $695.00
The Viper 3X is the next generation of the Blast series. The airframe is an extremely efficient F5D model that is designed to have the fastest straight line speed, and be the most efficient and hardest turning model in its class. For DS that means an extremely stable model and stupid fast.


Crossfire 2 Caliber X-Ray Micro Electro
Crossfire 2
Price: $2,150.00
Caliber
Price: $1,895.00
X-Ray Micro Electro
Price: $229.00
The Crossfire 2 is Stefan Eder's F3B design. His very successful and highly talented design team is responsible for F3B designs like the World Championship winning original Crossfire, highly successful Tool, and highly successful Target. The team took all of the knowledge from these past designs, taking the good attributes of each to make the bast F3B model available. The airfoil is designed by the same designer that designed the magical Satori airfoil, and has a thickness of only 7.9-7.55 and is designed as improved airfoils from the Crossfire, Tool, and Target focusing on creating the best airfoil for distance performance and high speed runs.
Mark Triebes CALIBER is his latest contribution to the F3F/F3B World. Mark has taken his 25 years of competition slope and sailplane knowledge and developed it into one of America's finest F3F airframes. The design is sleek, fluid, and balanced with all the latest thinking incorporated into this work of art. From a generous wrap around stab, high-aspect ratio vertical fin, and latest generation airfoil, the CALIBER incorporates everything well.


The X-ray Micro Electro sharing the same wing as the DLG X-ray is a great model. The model is slightly heavier than the DLG X-ray and because of its thin wing can be flown fast or can thermal around the sky. It is a great option for someone that does not want to mess around with the DLG throw or wants so more height the start out with than a DLG throw.


Viper 3X
MXC
Price: $2,495.00
Ultegra Elektro
List Price: $615.00
Price: $575.00
Viper 3X Electric
Price: $695.00
The MXC from RnR Products. The latest in X-C flying technology.

Specs:

Wingspan:            4.09m
Length:                 2.1m
Rudder Height:     .39m
Wing Area:          119 dm^2






The ULTEGRA at 295g, is an amazing example of fully molded DLG quality integrated with current Euro design yet offered at a very affordable price. The model is nothing short of elegant, and has flying characteristics that follow suit. One of the ULTEGRA'S more interesting features is the servo installation. They are PRE-MOLDED into the structure at time of manufacture. All four servos..... rudder, elevator, left and right aileron are INCLUDED in the price. Hard to believe!


The Viper 3X is the next generation of the Blast series. The airframe is an extremely efficient F5D model that is designed to have the fastest straight line speed, and be the most efficient and hardest turning model in its class.




Demon Excite 400 Pyro 400
Demon
Price: $529.99
Excite 400
Price: $270.00
Pyro 400
Price: $299.00
This purebred F5D machine is incredibly fast and clean. Developed in pursuit of the F5D world championship the Demon is optimized in every aspect of an F5D race. It has killer straight line speed and is extremely efficient in the turns. Along with the optimized design the best materials available for the lightest stiffest airframe where used. The wing is a full carbon layup and has a high modulus spar, and the fuse is made using the proven carbon kevlar weave.  



The Excite 400 is an awesome SP400 pylon racer. The little rocket is a blast to fly with the recommended Neu 1105 motor it is almost too fast to see. The model comes with the servo pre-installed and a complete hardware kit.  



The Pyro 400 is the ultimate SP400 pylon racer. Based on the successful Viper it is fast, efficient, and a blast to fly. The fully molded construction is with the best techniques for a super light, stiff, and strong airframe perfect for the high speed flying you will be doing with the Pyro. As always the Pyro includes a full set of hardware in it complete kit.  A NEU 1105 motor is recommended with the Pyro


VIP 400 Raketenwurm 4 Risk Mini Hotliner
VIP 400
Price: $195.00
Risk Mini Hotliner
Price: $269.00
The VIP 400 is a sweet little pylon racer. The very complete kit can be finished in a few hours, just add radio and motor. The kit comes with all necessary hardware to complete the VIP 400. The plane is an absolute blast to fly it is so fast that you almost have to fly by the sound of it.



The Raketenwurm 4 is the latest version of the Raketenwurm series from Stratair. This series of models have been developed and tweaked through 4 series of models and from they have come up with the highly refined and advanced Raketenwurm 4.



The Risk Hotliner is a great all around electric. Weather you are trying to have a light model that will thermal, an acrobatic sailplane, or a hotliner it will do it all. The model has a 30mm spinner so it can fit a wide range of electric motors to fit your needs. 



Risk Electric Topaz S V2 Electric Topaz S V2
Risk
Price: $269.00
Topaz S V2 Electric
Price: $875.95
Aileron Topaz S V2
Price: $975.95
The Risk is a great sloper. The model is perfect for you first moldy or for a fun light to medium air sloper or acro sloper. The fully molded design is inexpensive and has a great strength to weight ratio. The model is light enough for the lightest of slope days with its RG-15 airfoil is capable of great speeds when ballasted.  







The NEW Topaz S V2 with ailerons is an amazing model. The quality is spectacular and is hugely improved since the last manufacture. The model look more like a piece of art than a model. The Aileron version of the Topaz is an awesome flying plane. It is incredible to have such a low weight and the amazing performance of the already proven Topaz design. Finally we can have a sub 40 ounce model for light early morning conditions. The models comes with either an electric nose or a glider nose. 
Electric Espada RL Mini Ellipse
SBXC
Price: $1,995.00
Electric Espada RL
Price: $1,975.00
Mini Ellipse
List Price: $425.00
Price: $375.00




The Electric RL has the same wing plan form as the F3J RL, but the wings 4 ounces lighter. The fuselage has been completely redesigned to fit the NEU 1506/3Y motor with 6.7 gearbox, Phoenix 80  controller, Graupner 20x12 prop, and 8S-2100 NEU battery pack. With this power system the RL will climb 100 ft/sec. This setup is perfect for competition fly and makes the model weight 83 ounces, but if you wanted the RL for sport flying you could use a lighter less powerful setup you could make the RL weight in the low 70's.

The Mini Ellipse is one of the most popular of Jaro Mullers line of high quality sailplanes. Affordable, with flawless construction, allows this sweet , small , fun sloper, to also work thermals on the light air days.


Orca Espada RL Espadita
Orca
Price: $1,825.00
Espada RL
Price: $1,975.00
Espadita
Price: $1,095.00
Now available with extended 4 meter tips.
Orca is an all around F3J model that doubles as an F3B, F3F, and slope model with the different tip options. The model is manufactured by Breta who has exceptional build quality with nearly perfect fit and finish.The model is available in V-tail, or X-cross tail version.





Now comes standard with large rudder and large elevator.
The RL has the largest wingspan of the Espada family of models at 3.7 meters! It will out hang most planes on the market yet is still able to penetrate by clean design with a very thin airfoil on a high aspect ratio wing planform.
The Espadita is the long awaited two meter from Jaro Muller. It uses Jaro's new servo drive technology FISD which allows the servos to mount at the root of the wing and lets the drive system to be fully internal. The Espadita is great for TD, and Slope.


Radian Pro BNF Radian Radian Pro PNP
Radian Pro BNF
Price: $249.99
Radian PNP
Price: $159.99
Radian Pro PNP
Price: $184.99
Deal of the Day Price: $147.99
The Radian Pro comes equipped with an AR600 6-channel receiver, ailerons and functioning flaps to allow experienced sailplane pilots with advanced programmable radio systems to take advantage of mixing functions like reflex, camber and crow. 






The ParkZone® Radian™ offers the perfect opportunity for park pilots to experience the true essence of flight.  Although a powerful 480 brushless motor enables initial launch, the propeller soon folds back to reduce drag, freeing the plane to utilize thermals of air to remain aloft, instead of batteries. That means flight times for this quiet and eco-friendly alternative are much longer than they are with traditional electric aircraft, making a relaxing day in the great outdoors even better.



The Radian Pro PNP comes equipped with ailerons and functioning flaps. This makes it possible for experienced sailplane pilots with advanced programmable radio systems to take advantage of mixing functions like reflex, camber and crow.





Radian Topaz S V2 Steigeisen
Radian RTF
Price: $249.99
Topaz S V2
Price: $875.95
The ParkZone® Radian™ offers the perfect opportunity for park pilots to experience the true essence of flight.  Although a powerful 480 brushless motor enables initial launch, the propeller soon folds back to reduce drag, freeing the plane to utilize thermals of air to remain aloft, instead of batteries. That means flight times for this quiet and eco-friendly alternative are much longer than they are with traditional electric aircraft, making a relaxing day in the great outdoors even better.



The Topaz SV2 is a top-competition RES. After winning multiple RES competitions with the Topaz S, Skip re-designed the model to further increase it's competitiveness. To achieve these witnessed improvements, Skip's design increased the center section by 4", the front pod has been modified into  a drooping nose which improves landings and aerodynamics and the airframe has been reinforced with more carbon thus making this the most efficient and competitive Topaz to date.

The Steigeisen is the new DLG from the Logo design team. It is designed around the new F3K rules which require models the launch very high, range far up wind and down wind, out hang the competition, and still maintain user friendly flight characteristics. The Steigeisen does all that and more! The model is already excelling in F3K competitions, most notably winning the 2009 F3K Euro Tour.  
Steigeisen Lift Superstar Elita
Superstar
Price: $1,395.00
Elita
Price: $1,695.00
The NEW Steigeisen lift is designed for light air flying. It has more wing area, and a larger tail to make the plane more user friendly and hang better in light lift. It still uses the thin airfoils to allow it to launch high and move around great. The Steigeisen lift is designed to complement the regular Steigeisen and be used with it for the light air conditions. The combination of the two models will give you an amazing performing model whether there be high wing or lot of sink the Steigeisen will move right through it and get to the air, or the Steigeisen lift will let you hang in the lightest of it. Now available in 62 ounce Super light version
The SUPERSTAR is the latest soaring creation from designer/manufacturer Karl Koudelka. Famous for successful models such as the Starlight 3000 and the 3000 XL. The model is one of the top F3J models out there, and is priced better than all of its competitors.

The Elita is a very good slope model. It is a very fast F3F plane. It flies hotter than most planes and once you get it on step it seems like there it almost no time between the turns. Then it bangs the turns very fast without losing much energy. The Elita is also very acrobatic with its full flying vtail or xtail.



Crossfire Slope Blast 3X
Crossfire
Price: $1,695.00
Slope
Price: $475.00
Blast 3X
Price: $595.00
The Crossfire is an amazing leap in production and technology making it possible for all pilots to own what only a few "team" members had access to in the past.  Typically this design performance was limited to very controlled teams in Europe.  If you were lucky to be a friend and a strong pilot, you might receive a competitive F3B model!  Designed by Stefan Eder and his design group in Germany, it was to become an "all around model for everyone.


The SLOPE is an excellent "all around model" for all slope conditions. It is fun to fly in light, medium, or heavy wind on the front side and yet is an affordable high quality backside machine!



The Blast evolved from a highly successful F5D design. This highly efficient design is available insanely strong 3X carbon for DSing. The Airframe is extremely efficient capable of cutting through choppy air, and penetrating through strong winds with out ballast.



Crossfire EVO Electric German Eagle Ellipse 2
Crossfire EVO
Price: $1,795.00
Electric German Eagle
Price: $1,695.00
Ellipse 2
Price: $1,595.00
The Crossfire EVO comes with RDS pockets installed, and can be purchased either with horns or RDS. The design portrays sheer soaring elegance, with an increased tail moment for locked in straight line efficiency, and incredible speed.



The Electric German Eagle is designed and developed at the world level specifically for F3B then a  large fuse for motor and battery was added to make an awesome electric.  Designed by Gunther Aichholzer of Austria, it is the most recent CNC molded full carbon offering from Europe.





The Ellipse 2 is a classic slope racer by Jaro Muller. This model uses the RG-15 airfoil, and a very friendly plan form that allows someone to be fast on the race course while making a lot of mistakes.



Espada R German Eagle Predator II
Espada R
Price: $1,875.00
German Eagle
Price: $1,695.00
Predator II
Price: $895.00
The Espada R is built extremely strong and light. It is able to hang with most planes in light air but it really excels when the wind picks up. The ballast tube is able to hold 40 ounces in brass which is more than you will ever need for F3J or TD. The R is also a very good light air F3F and slope acrobatic plane.



The German Eagle is the latest in F3B sailplane design developed at the world level specifically for F3B competition and works great for F3F. Designed by Gunther Aichholzer of Austria, it is the most recent CNC molded full carbon offering from Europe.



Now with a new fuse, new tail, and new joiner to make the plane even fast and more user friendly.

Finally a competitive F3F racer that is very affordable! The Predator is the latest design by Gudmund Malones of Norway. Gudmund used his own new age airfoil the GM08/6.8 to create a very fast, hard turning, amazingly user friendly model.

Shark Starlight 3000
Revenge DS
List Price: $1,900.00
Price: $1,695.00
Starlight 3000
Price: $1,295.00
The Revenge is Jesina's new DS and F3F design. The wing is a shortened Stratos 6 DS wing built stronger than ever before, while keeping the well proven fuse and stabs. The model is designed for F3F racing, or light DS and DS acro. With the strong wing and fast turning design you are able to do some amazing acro 150mph and below. The quality on the models is exceptional. The wings come pre-wired with control horns ready for install. The fuse is wired as well and has a ballast tube pre-installed into the keel.
I have been looking a long time for a high quality, high performance Cross Country Sailplane to replace my trusty SBXC.  The Shark XL fits the bill. The Shark XL also doubles as the model that will get all the attention at the big slope meets! 4.5 meters in span with fully molded CNC technology basically a GIANT F3B ship you have to see it to believe it.



Now available in XL version with extra foot in center section
The Starlight 3000 is a great flying model. It uses the MH32 airfoil which is a very user friendly airfoil. The model is perfect for the someone trying to get into contest flying.




Stratos 6 Vector III
Stratos 6
Price: $1,695.00
Vector III
Price: $595.00
Ultegra DLG
Price: $595.00
The STRATOS history speaks for itself as a purebred in the sport. One of the identifying features of STRATOS 6 is that of immaculate construction technique, fit, and finish. Arriving pre-wired with Airtronics Z connectors( fits all brands) all the wing connection ports are installed and the simple installation of servos get you going .....fast!


The Vector III has been developed and refined over two decades to create the ultimate slope acrobatic machine. The fully molded airframe from CNC molds and the most advanced fabrics makes a strong yet light airframe perfect for acro. The fully symmetrical airfoils, full flying stab, and 2.6 meter wing span is perfect for crazy in your face acro.







X-Ray Micro DLG Wizzard DSX Orion F3K
X-Ray Micro DLG
Price: $229.00
WIZARD DS
Price: $1,695.00
The X-ray is the ultimate micro DLG. It's fully molded wing provides an extremely light and strong wing that can handle the hardest of launches. The surfaces are spring loaded with a wire so only a string is need to move the surface providing a very light push rod system. The X-ray is the ultimate micro DLG.


343MPH!

Wizard Compact DSX uses C93+C163+C256+UMS high modules carbon through out the plane. The spar is triple the size with a double joiner system, span loading ballast, the strength was increased all the way around, the strength of the pre-installed horns was increased, as well as the amazingly built control rods. On top of all this the fit and finish is truly amazing.
The Orion is a Polish built discus launched glider, designed to be a fully competitive molded F3K model without breaking the bank. Fully molded construction provides a light, yet robust airframe, with very user friendly flight characteristics. The Orion is quickly earning a reputation after being used in the recent F3K World Championships and taking the top place in the Polish Nationals.
Typhoon Typhoon Carbon Electro Typhoon Carbon
Typhoon Glass
Price: $449.00
Typhoon Carbon
Price: $559.00
A 2 meter rocket ship aimed at the flier who has made his bones on smaller ships and now wants something with higher potential, the Typhoon offers sparkling slope performance, but turns into a pussycat when thermalling.


A 2 meter rocket ship aimed at the flier who has made his bones on smaller ships and now wants something with higher potential, the Typhoon offers sparkling slope performance, but turns into a pussycat when thermalling.


A 2 meter rocket ship aimed at the flier who has made his bones on smaller ships and now wants something with higher potential, the Typhoon offers sparkling slope performance, but turns into a pussycat when thermalling.


Electro Typhoon Carbon Dorado Glass Dorado Carbon
Dorado Glass
Price: $595.00
Dorado Carbon
Price: $695.00
A 2 meter rocket ship aimed at the flier who has made his bones on smaller ships and now wants something with higher potential, the Typhoon offers sparkling slope performance, but turns into a pussycat when thermalling.


The new generation of Vector III - Dorado!
Wing span: 2.34m
Fuselage length: 1.32m

This is the big brother of the Vector. It is a fully molded slope plane that is extremely aerobatic. It has a fully symmetrical wing airfoil that makes the plane fly just as good inverted as it flies right side up.

The new generation of Vector III - Dorado!
Wing span: 2.34m

Fuselage length: 1.32m

Flying Weight 74-80oz


This is the big brother of the Vector. It is a fully molded slope plane that is extremely aerobatic. It has a fully symmetrical wing airfoil that makes the plane fly just as good inverted as it flies right side up.
Tomcat Glass Tomcat Carbon Minivec Glass
Tomcat Glass
Price: $649.00
Tomcat Carbon
Price: $799.00
Minivec Glass
Price: $329.00

 Tomcat Electric version available!!!

 

The new slope model with excellent performance and nice design.
Wing span: 2.6m
Fuselage length: 1.4m

More detailed description with pictures and video will follow….

 Tomcat Electric version available!!!

 

The new slope model with excellent performance and nice design.
Wing span: 2.6m
Fuselage length: 1.4m

More detailed description with pictures and video will follow….

This is simply an affordable bundle of fun with a cool new look that we hope will become as much of a classic as its dad.
Minivec Glass Emotion Glass Emotion Carbon
Minivec Carbon
Price: $419.00
Emotion Glass
Price: $475.00
Emotion Carbon
Price: $575.00

This is simply an affordable bundle of fun with a cool new look that we hope will become as much of a classic as its dad.

The new slope model with excellent performance and nice design.
Wing span: 2.0m
Fuselage length: 1.2m
The new slope model with excellent performance and nice design.
Wing span: 2.0m
Fuselage length: 1.2m
Toba F3B Glass Toba F3B Glass Strega Glass
Toba F3B Glass
Price: $899.00
Toba F3B Carbon
Price: $1,099.00
Strega Glass
Price: $795.00
  
  
Flying the Strega is easy as it is with all well designed sailplanes. Slow with the large flaps down Strega is a pussycat and can be backed up over the edge for landings. At speed it has amazing energy retention whether “banked and yanked” or “upped and overed”. It tracks well and with coupled flaps/ailerons plus snap flap it just kicks around the turns.

Strega Carbon Hornet Glass Tucan Glass
Strega Carbon
Price: $895.00
Hornet Glass
Price: $549.99
Tucan Glass
Price: $595.00
Flying the Strega is easy as it is with all well designed sailplanes. Slow with the large flaps down Strega is a pussycat and can be backed up over the edge for landings. At speed it has amazing energy retention whether “banked and yanked” or “upped and overed”. It tracks well and with coupled flaps/ailerons plus snap flap it just kicks around the turns.

A new 2m X tail electric Hornet

Perform very well, if use 35 out runner motor, the speed will be 150km/h. 

A good choice for the people who live in a no slope area…

A 2 meter sailplane for F3B, F3F, and slope.
Tucan Carbon E Sunbird 60" Glass E Sunbird 60" carbon
Tucan Carbon
Price: $695.00
E Sunbird 60" Glass
Price: $349.00
E Sunbird 60" Carbon
Price: $399.00
A 2 meter sailplane for F3B, F3F, and slope. 3m F3B, slope, and F3F 3m F3B, slope, and F3F
Pulsar 3.6S Pro Competition Sailplane (ARF) Pulsar 3.2S Pro Sailplane (ARF)
Pulsar 3.6 Sailplane
Price: $975.00
Pulsar 3.2 Sailplane
Price: $875.00
NEW! Orion V6!
Price: $616.00
The Pulsar 3.6S Pro Competition is the latest addition to the ever-growing Pulsar family of hand-made competition/sport sailplanes. Built at our request, this model is the improved version of the older 3.6m Pulsar. The Pulsar 3.6 models use the AG25 modified airfoil designed by Dr. Mark Drela specifically for 3m and larger thermal duration planes. The Pulsar 3.2S Pro Competition is the latest addition to the ever-growing Pulsar family of hand-made competition/sport sailplanes. Built at our request, this model is the improved version of the older 3.2m Pulsar. This is a very competitive 3.2 sailplane for F3J and TD ORION was developed and prepared to take part in the World Cup. Its main feature is a large wing area of 22.8 dm2 and thin profile of 6.7% which was the base of the profile of HN . Patterns of the wings and fuselage were made on a CNC milling machine which ensures high accuracy and compliance with developed assumptions . The construction of the hull and rudder allows the execution of odkręcanego ballast for easy transport. Elevator & Rudder control can be made by cable or bowden carbon ( available as an option ) .