|
|
|
|
|
|
Caliber
|
|
Price: $1,595.00
|
|
|
Mark Triebes CALIBER is his latest contribution
to the F3F/F3B World. Mark has taken his 25 years of competition slope
and sailplane knowledge and developed it into one of America's finest
F3F airframes. The design is sleek, fluid, and balanced with all the
latest thinking incorporated into this work of art. From a generous wrap
around stab, high-aspect ratio vertical fin, and latest generation
airfoil, the CALIBER incorporates everything well.
|
|
|
|
|
|
|
|
|
|
Crossfire
|
|
Price: $1,695.00
|
|
|
The
Crossfire is an amazing leap in production and technology making it
possible for all pilots to own what only a few "team" members had
access to in the past. Typically this design performance was limited to very controlled teams in Europe. If
you were lucky to be a friend and a strong pilot, you might receive a
competitive F3B model! Designed by Stefan Eder and his design group in
Germany, it was to become an "all around model for everyone.
|
|
|
|
|
|
|
|
|
|
Crossfire 2
|
|
Price: $2,150.00
|
|
|
The Crossfire 2 is Stefan
Eder's F3B design. His very successful and highly talented design team
is responsible for F3B designs like the World Championship winning
original Crossfire, highly successful Tool, and highly successful
Target. The team took all of the knowledge from these past designs,
taking the good attributes of each to make the bast F3B model available.
The airfoil is designed by the same designer that designed the magical
Satori airfoil, and has a thickness of only 7.9-7.55 and is designed as
improved airfoils from the Crossfire, Tool, and Target focusing on
creating the best airfoil for distance performance and high speed runs.
|
|
|
|
|
|
|
|
|
|
Crossfire EVO
|
|
Price: $1,795.00
|
|
|
The Crossfire EVO comes with RDS pockets installed, and can be purchased either with horns or RDS. The design portrays sheer soaring elegance, with an increased tail moment for locked in straight line efficiency, and incredible speed.
|
|
|
|
|
|
|
|
|
|
E Sunbird 60" Carbon
|
|
Price: $399.00
|
|
|
3m F3B, slope, and F3F
|
|
|
|
|
|
|
|
|
|
|
E Sunbird 60" Glass
|
|
Price: $349.00
|
|
|
3m F3B, slope, and F3F
|
|
|
|
|
|
|
|
|
|
Elita
|
|
Price: $1,695.00
|
|
|
The
Elita is a very good slope model. It is a very fast F3F plane. It flies
hotter than most planes and once you get it on step it seems like there
it almost no time between the turns. Then it bangs the turns very fast
without losing much energy. The Elita is also very acrobatic with its
full flying vtail or xtail.
|
|
|
|
|
|
|
|
|
|
Ellipse 2
|
|
Price: $1,595.00
|
|
|
The
Ellipse 2 is a classic slope racer by Jaro Muller. This model uses the
RG-15 airfoil, and a very friendly plan form that allows someone to be
fast on the race course while making a lot of mistakes.
|
|
|
|
|
|
|
|
|
|
Emotion Carbon
|
|
Price: $575.00
|
|
|
The new slope model with excellent performance and nice design.
Wing span: 2.0m
Fuselage length: 1.2m
|
|
|
|
|
|
|
|
|
|
Emotion Glass
|
|
Price: $475.00
|
|
|
The new slope model with excellent performance and nice design.
Wing span: 2.0m
Fuselage length: 1.2m
|
|
|
|
|
|
|
|
|
|
Espada R
|
|
Price: $1,875.00
|
|
|
The Espada R is built extremely strong and light. It is able to hang with most planes in light air but it really excels when the wind picks up. The ballast tube is able to hold 40 ounces in brass which is more than you will ever need for F3J or TD. The R is also a very good light air F3F and slope acrobatic plane.
|
|
|
|
|
|
|
|
|
|
Espadita
|
|
Price: $975.00
|
|
|
The Espadita is the long awaited two meter from Jaro Muller. It uses Jaro's new servo drive technology FISD which allows the servos to mount at the root of the wing and lets the drive system to be fully internal. The Espadita is great for TD, and Slope.
|
|
|
|
|
|
|
|
|
|
German Eagle
|
|
Price: $1,695.00
|
|
|
The German Eagle is the latest in F3B sailplane design developed at the world level specifically for F3B competition and works great for F3F. Designed by Gunther Aichholzer of Austria, it is the most recent CNC molded full carbon offering from Europe.
|
|
|
|
|
|
|
|
|
|
Mini Ellipse
|
|
List Price: $425.00
Price: $375.00
|
|
|
The Mini Ellipse is one of the most popular of Jaro Mullers line of high quality sailplanes. Affordable, with flawless construction, allows this sweet , small , fun sloper, to also work thermals on the light air days.
|
|
|
|
|
|
|
|
|
|
Opus
|
|
Price: $750.00
|
|
|
The OPUS is a well proven airframe, it is great for light air F3F to heavy DS. We offer it in a glass version and a 3X carbon version.
|
|
|
|
|
|
|
|
|
|
Orca V-tail
|
|
Price: $1,825.00
|
|
|
Now available with extended 4 meter tips.
Orca is an all around F3J model that doubles as an F3B, F3F, and slope model with the different tip options. The model is manufactured by Breta who has exceptional build quality with nearly perfect fit and finish.The model is available in V-tail, or X-cross tail version.
|
|
|
|
|
|
|
|
|
|
Orca X-tail
|
|
Price: $1,825.00
|
|
|
Now available with extended 4 meter tips.
Orca is an all around F3J model that doubles as an F3B, F3F, and slope model with the different tip options. The model is manufactured by Breta who has exceptional build quality with nearly perfect fit and finish.The model is available in V-tail, or X-cross tail version.
|
|
|
|
|
|
|
|
|
|
Predator II
|
|
Price: $895.00
|
|
|
Now with a new fuse, new tail, and new joiner to make the plane even fast and more user friendly.
Finally
a competitive F3F racer that is very affordable! The Predator is the
latest design by Gudmund Malones of Norway. Gudmund used his own new
age airfoil the GM08/6.8 to create a very fast, hard turning, amazingly
user friendly model.
|
|
|
|
|
|
|
|
|
|
Revenge DS
|
|
List Price: $1,900.00
Price: $1,695.00
|
|
|
The Revenge is Jesina's new DS and F3F design. The wing is a shortened Stratos 6 DS wing built stronger than ever before, while keeping the well proven fuse and stabs. The model is designed for F3F racing, or light DS and DS acro. With the strong wing and fast turning design you are able to do some amazing acro 150mph and below. The quality on the models is exceptional. The wings come pre-wired with control horns ready for install. The fuse is wired as well and has a ballast tube pre-installed into the keel.
|
|
|
|
|
|
|
|
|
|
Shark XL
|
|
|
I
have been looking a long time for a high quality, high performance
Cross Country Sailplane to replace my trusty SBXC. The Shark XL fits
the bill. The Shark XL also doubles as the model that will get all the
attention at the big slope meets! 4.5 meters in span with fully molded
CNC technology basically a GIANT F3B ship you have to see it to believe
it.
|
|
|
|
|
|
|
|
|
|
Slope
|
|
Price: $475.00
|
|
|
The SLOPE is an excellent "all around model" for all slope conditions. It is fun to fly in light, medium, or heavy wind on the front side and yet is an affordable high quality backside machine!
|
|
|
|
|
|
|
|
|
|
Stratos 6
|
|
Price: $1,695.00
|
|
|
The
STRATOS history speaks for itself as a purebred in the sport. One of
the identifying features of STRATOS 6 is that of immaculate
construction technique, fit, and finish. Arriving pre-wired with
Airtronics Z connectors( fits all brands) all the wing connection ports
are installed and the simple installation of servos get you going
.....fast!
|
|
|
|
|
|
|
|
|
|
Strega Carbon
|
|
Price: $895.00
|
|
|
Flying
the Strega is easy as it is with all well designed sailplanes. Slow
with the large flaps down Strega is a pussycat and can be backed up
over the edge for landings. At speed it has amazing energy retention
whether “banked and yanked” or “upped and overed”. It tracks well and
with coupled flaps/ailerons plus snap flap it just kicks around the
turns.
|
|
|
|
|
|
|
|
|
|
|
Strega Glass
|
|
Price: $795.00
|
|
|
Flying
the Strega is easy as it is with all well designed sailplanes. Slow
with the large flaps down Strega is a pussycat and can be backed up
over the edge for landings. At speed it has amazing energy retention
whether “banked and yanked” or “upped and overed”. It tracks well and
with coupled flaps/ailerons plus snap flap it just kicks around the
turns.
|
|
|
|
|
|
|
|
|
|
Sunbird
|
|
Price: $395.00
|
|
|
James
designed it to be very transportable – basically, disassembled it can
fit on a car parcel shelf, so it is very convenient to carry around,
but at the same time he wanted to make an airframe that in expert hands
could really perform. The aerofoil section is probably quite advanced
for this kind of plane and gives a very wide speed range and
possibility of operation in a wide range of wind conditions.
|
|
|
|
|
|
|
|
|
|
Toba F3B Carbon
|
|
Price: $1,099.00
|
|
|
|
|
|
|
|
|
|
|
|
|
Toba F3B Glass
|
|
Price: $899.00
|
|
|
|
|
|
|
|
|
|
|
|
|
Tomcat Carbon
|
|
Price: $799.00
|
|
|
Tomcat Electric version available!!! The new slope model with excellent performance and nice design.
Wing span: 2.6m
Fuselage length: 1.4m More detailed description with pictures and video will follow….
|
|
|
|
|
|
|
|
|
|
Tomcat Glass
|
|
Price: $649.00
|
|
|
Tomcat Electric version available!!! The new slope model with excellent performance and nice design.
Wing span: 2.6m
Fuselage length: 1.4m More detailed description with pictures and video will follow….
|
|
|
|
|
|
|
|
|
|
Tucan Carbon
|
|
Price: $695.00
|
|
|
A 2 meter sailplane for F3B, F3F, and slope.
|
|
|
|
|
|
|
|
|
|
Tucan Glass
|
|
Price: $595.00
|
|
|
A 2 meter sailplane for F3B, F3F, and slope.
|
|
|
|
|
|
|
|
|
|
Typhoon Carbon
|
|
Price: $559.00
|
|
|
A 2 meter rocket ship aimed at the flier who has made his bones on smaller ships and now wants something with higher potential, the Typhoon offers sparkling slope performance, but turns into a pussycat when thermalling.
|
|
|
|
|
|
|
|
|
|
Typhoon Glass
|
|
Price: $449.00
|
|
|
A 2 meter rocket ship aimed at the flier who has made his bones on smaller ships and now wants something with higher potential, the Typhoon offers sparkling slope performance, but turns into a pussycat when thermalling.
|
|
|
|
|
|
|
|
|
|
Vector III
|
|
Price: $595.00
|
|
|
The
Vector III has been developed and refined over two decades to create
the ultimate slope acrobatic machine. The fully molded airframe from
CNC molds and the most advanced fabrics makes a strong yet light
airframe perfect for acro. The fully symmetrical airfoils, full flying
stab, and 2.6 meter wing span is perfect for crazy in your face acro.
|
|
|
|
|
|
|
|
|
|
Viper 3X
|
|
Price: $695.00
|
|
|
The
Viper 3X is the next generation of the Blast series. The airframe is an
extremely efficient F5D model that is designed to have the fastest
straight line speed, and be the most efficient and hardest turning
model in its class. For DS that means an extremely stable model and
stupid fast.
|
|
|
|
|
|
|
|
|
|
WIZARD DS
|
|
Price: $1,395.00
|
|
|
343MPH!
Wizard
Compact DSX uses C93+C163+C256+UMS high modules carbon through out
the plane. The spar is triple the size with a double joiner system,
span loading ballast, the strength was increased all the way
around, the strength of the pre-installed horns was increased, as well
as the amazingly built control rods. On top of all this the fit and
finish is truly amazing.
|
|
|
|
